← NAS & RAID Calculator

NAS pSEO Landing

3x 6TB RAID 1 Calculator

Estimate usable capacity, fault tolerance, and efficiency for 3x 6TB in RAID 1 with reserve best practices.

Capacity Snapshot

Raw Capacity

18.00 TB

Usable Capacity

5.40 TB

Fault Tolerance

2 drives*

Efficiency

33.3%

Strong redundancy but low capacity efficiency. Great for small, critical datasets. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode Usable Tolerance Efficiency
RAID 5 10.80 TB 1 drive 66.7%
RAID 6 N/A N/A N/A
RAID 10 N/A N/A N/A
RAID-Z1 10.80 TB 1 drive 66.7%
RAID-Z2 N/A N/A N/A

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

FAQ

How many disk failures can RAID 1 tolerate in this setup?

This setup can tolerate 2 drives*. Real-world survivability depends on mirror placement, rebuild stress, and drive health.

How much usable storage does 3x 6TB RAID 1 provide?

This NAS planning scenario estimates 5.40 TB usable after a 10% reserve from 18.00 TB raw.

Why include a 10% reserve when planning NAS available space?

Keeping free space improves filesystem behavior for snapshots, metadata, and write performance. Full arrays often perform worse and rebuild more slowly.

Can this calculator replace real-world benchmark and rebuild testing?

No. Use this page for pre-purchase sizing, then validate with workload benchmarks, SMART health policy, and a tested restore plan.