UK 10x 8TB RAID 10 NAS Calculator

Estimate usable TB, parity, and fault tolerance for UK homelab buyers using 10x 8TB in RAID 10.

Capacity Snapshot

Raw Capacity

80.00 TB

Usable Capacity

36.00 TB

Fault Tolerance

1 drive per mirror pair*

Efficiency

50.0%

Excellent random I/O and rebuild behavior; capacity is typically 50% of raw. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode	Usable	Tolerance	Efficiency
RAID 5	64.80 TB	1 drive	90.0%
RAID 6	57.60 TB	2 drives	80.0%
RAID 10	36.00 TB	1 drive per mirror pair*	50.0%
RAID-Z1	64.80 TB	1 drive	90.0%
RAID-Z2	57.60 TB	2 drives	80.0%

UK Buyer Context

UK homelab planners commonly balance higher per-drive pricing with power and chassis constraints, so efficient but resilient layouts become more valuable.

• Model dual-parity options early if rebuild time is a concern.
• Include reserve headroom to avoid running pools at high fill percentages.

Brand / Region Glossary

Power Budget

Expected always-on energy usage cost factored into NAS layout decisions.

Rebuild Window

Estimated time exposure while replacing a failed drive and restoring parity.

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: US 10x 8TB RAID 10 NAS Calculator Next: EU 10x 8TB RAID 10 NAS Calculator →

FAQ

How much real-world usable storage does 10x 8TB RAID 10 provide?

For UK homelab buyers, this NAS planning scenario estimates 36.00 TB usable after a 10% reserve from 80.00 TB raw.

Can this calculator replace real-world benchmark and rebuild testing?

No. Use this page for pre-purchase sizing, then validate with workload benchmarks, SMART health policy, and a tested restore plan.

Why include a 10% reserve when planning NAS storage headroom?

Keeping free space improves filesystem behavior for snapshots, metadata, and write performance. Full arrays often perform worse and rebuild more slowly.

How many disk failures can RAID 10 tolerate in this setup?

This setup can tolerate 1 drive per mirror pair*. Real-world survivability depends on mirror placement, rebuild stress, and drive health.