UK 6x 8TB RAID 6 NAS Calculator

Estimate usable TB, parity, and fault tolerance for UK homelab buyers using 6x 8TB in RAID 6.

Capacity Snapshot

Raw Capacity

48.00 TB

Usable Capacity

28.80 TB

Fault Tolerance

2 drives

Efficiency

66.7%

Safer for larger arrays with dual parity, at the cost of one extra parity disk. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode	Usable	Tolerance	Efficiency
RAID 5	36.00 TB	1 drive	83.3%
RAID 6	28.80 TB	2 drives	66.7%
RAID 10	21.60 TB	1 drive per mirror pair*	50.0%
RAID-Z1	36.00 TB	1 drive	83.3%
RAID-Z2	28.80 TB	2 drives	66.7%

UK Buyer Context

UK homelab planners commonly balance higher per-drive pricing with power and chassis constraints, so efficient but resilient layouts become more valuable.

• Model dual-parity options early if rebuild time is a concern.
• Include reserve headroom to avoid running pools at high fill percentages.

Brand / Region Glossary

Power Budget

Expected always-on energy usage cost factored into NAS layout decisions.

Rebuild Window

Estimated time exposure while replacing a failed drive and restoring parity.

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: US 6x 8TB RAID 6 NAS Calculator Next: EU 6x 8TB RAID 6 NAS Calculator →

FAQ

How much real-world usable storage does 6x 8TB RAID 6 provide?

For UK homelab buyers, this NAS planning scenario estimates 28.80 TB usable after a 10% reserve from 48.00 TB raw.

How many disk failures can RAID 6 tolerate in this setup?

This setup can tolerate 2 drives. Real-world survivability depends on mirror placement, rebuild stress, and drive health.

Can this calculator replace real-world benchmark and rebuild testing?

No. Use this page for pre-purchase sizing, then validate with workload benchmarks, SMART health policy, and a tested restore plan.

Should I optimize this 6-drive plan for available space or resiliency first?

For long-lived NAS pools, resiliency first is usually safer. Capacity can be expanded later, while a risky parity choice can force migration sooner.