EU 4x 20TB RAID 6 NAS Calculator

Estimate usable TB, parity, and fault tolerance for EU homelab buyers using 4x 20TB in RAID 6.

Capacity Snapshot

Raw Capacity

80.00 TB

Usable Capacity

36.00 TB

Fault Tolerance

2 drives

Efficiency

50.0%

Safer for larger arrays with dual parity, at the cost of one extra parity disk. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode	Usable	Tolerance	Efficiency
RAID 5	54.00 TB	1 drive	75.0%
RAID 6	36.00 TB	2 drives	50.0%
RAID 10	36.00 TB	1 drive per mirror pair*	50.0%
RAID-Z1	54.00 TB	1 drive	75.0%
RAID-Z2	36.00 TB	2 drives	50.0%

EU Buyer Context

EU deployments often place additional emphasis on energy efficiency and predictable lifecycle upgrades, especially for always-on NAS fleets.

• Choose a layout that minimizes emergency rebuild risk under continuous operation.
• Prefer capacity plans that survive one upgrade cycle without pool redesign.

Brand / Region Glossary

Lifecycle Planning

Capacity and reliability strategy across multiple hardware refresh cycles.

Operational Headroom

Intentional free-space margin to protect performance and snapshot behavior.

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: UK 4x 20TB RAID 6 NAS Calculator Next: APAC 4x 20TB RAID 6 NAS Calculator →

FAQ

Can this calculator replace real-world benchmark and rebuild testing?

No. Use this page for pre-purchase sizing, then validate with workload benchmarks, SMART health policy, and a tested restore plan.

Why include a 10% reserve when planning NAS available space?

Keeping free space improves filesystem behavior for snapshots, metadata, and write performance. Full arrays often perform worse and rebuild more slowly.

How much effective storage does 4x 20TB RAID 6 provide?

For EU homelab buyers, this NAS planning scenario estimates 36.00 TB usable after a 10% reserve from 80.00 TB raw.

How many disk failures can RAID 6 tolerate in this setup?

This setup can tolerate 2 drives. Real-world survivability depends on mirror placement, rebuild stress, and drive health.