QNAP 6x 12TB RAID 10 NAS Calculator

Estimate usable TB, parity, and fault tolerance for QNAP NAS users using 6x 12TB in RAID 10.

Capacity Snapshot

Raw Capacity

72.00 TB

Usable Capacity

32.40 TB

Fault Tolerance

1 drive per mirror pair*

Efficiency

50.0%

Excellent random I/O and rebuild behavior; capacity is typically 50% of raw. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode	Usable	Tolerance	Efficiency
RAID 5	54.00 TB	1 drive	83.3%
RAID 6	43.20 TB	2 drives	66.7%
RAID 10	32.40 TB	1 drive per mirror pair*	50.0%
RAID-Z1	54.00 TB	1 drive	83.3%
RAID-Z2	43.20 TB	2 drives	66.7%

QNAP Planning Notes

QNAP buyers often compare capacity efficiency against service consolidation needs, where VM storage, containers, and media serving all compete for IOPS and free space.

• Model around mixed workloads: media throughput plus VM random I/O.
• Reserve enough headroom so thin-provisioned services do not overrun the array.
• When in doubt, prioritize safer parity for arrays above 6 drives.

Brand / Region Glossary

Qtier

QNAP auto-tiering system that moves hot and cold data across storage classes.

Storage & Snapshots

QTS module for RAID pool management, volume control, and snapshots.

Thin Provisioning

Allocates logical space first and consumes physical capacity over time.

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: Synology 6x 12TB RAID 10 NAS Calculator Next: TrueNAS 6x 12TB RAID 10 NAS Calculator →

FAQ

How many disk failures can RAID 10 tolerate in this setup?

This setup can tolerate 1 drive per mirror pair*. Real-world survivability depends on mirror placement, rebuild stress, and drive health.

How much usable storage does 6x 12TB RAID 10 provide?

For QNAP users, this NAS planning scenario estimates 32.40 TB usable after a 10% reserve from 72.00 TB raw.

Why include a 10% reserve when planning NAS available space?

Keeping free space improves filesystem behavior for snapshots, metadata, and write performance. Full arrays often perform worse and rebuild more slowly.

Can this calculator replace real-world benchmark and rebuild testing?

No. Use this page for pre-purchase sizing, then validate with workload benchmarks, SMART health policy, and a tested restore plan.