TrueNAS 10x 16TB RAID-Z1 NAS Calculator

Estimate usable TB, parity, and fault tolerance for TrueNAS NAS users using 10x 16TB in RAID-Z1.

Capacity Snapshot

Raw Capacity

160.00 TB

Usable Capacity

129.60 TB

Fault Tolerance

1 drive

Efficiency

90.0%

ZFS single-parity equivalent of RAID 5; common for smaller homelab pools. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode	Usable	Tolerance	Efficiency
RAID 5	129.60 TB	1 drive	90.0%
RAID 6	115.20 TB	2 drives	80.0%
RAID 10	72.00 TB	1 drive per mirror pair*	50.0%
RAID-Z1	129.60 TB	1 drive	90.0%
RAID-Z2	115.20 TB	2 drives	80.0%

TrueNAS / ZFS Planning Notes

TrueNAS and ZFS planners usually care about parity width, scrub cadence, and healthy operating headroom. Capacity is only one part of pool durability.

• Treat RAID-Z2 as a common baseline for medium and large homelab pools.
• Keep meaningful free space to reduce fragmentation pressure under snapshots.
• Plan vdev growth strategy early, since expansion paths affect long-term efficiency.

Brand / Region Glossary

vdev

A virtual device group in ZFS; multiple vdevs form a storage pool.

Scrub

Background integrity scan that verifies checksums and repairs parity mismatches.

RAID-Z Expansion

ZFS feature set and planning topic for growing parity groups safely.

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: QNAP 10x 16TB RAID-Z1 NAS Calculator Next: Unraid 10x 16TB RAID-Z1 NAS Calculator →

FAQ

How many disk failures can RAID-Z1 tolerate in this setup?

This setup can tolerate 1 drive. Real-world survivability depends on mirror placement, rebuild stress, and drive health.

Should I optimize this 10-drive plan for storage headroom or resiliency first?

For long-lived NAS pools, resiliency first is usually safer. Capacity can be expanded later, while a risky parity choice can force migration sooner.

Why include a 10% reserve when planning NAS available space?

Keeping free space improves filesystem behavior for snapshots, metadata, and write performance. Full arrays often perform worse and rebuild more slowly.

How much effective storage does 10x 16TB RAID-Z1 provide?

For TrueNAS users, this NAS planning scenario estimates 129.60 TB usable after a 10% reserve from 160.00 TB raw.