TrueNAS 6x 16TB RAID-Z2 NAS Calculator

Estimate usable TB, parity, and fault tolerance for TrueNAS NAS users using 6x 16TB in RAID-Z2.

Capacity Snapshot

Raw Capacity

96.00 TB

Usable Capacity

57.60 TB

Fault Tolerance

2 drives

Efficiency

66.7%

Popular TrueNAS default for medium arrays; dual-parity with good safety margin. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode	Usable	Tolerance	Efficiency
RAID 5	72.00 TB	1 drive	83.3%
RAID 6	57.60 TB	2 drives	66.7%
RAID 10	43.20 TB	1 drive per mirror pair*	50.0%
RAID-Z1	72.00 TB	1 drive	83.3%
RAID-Z2	57.60 TB	2 drives	66.7%

TrueNAS / ZFS Planning Notes

TrueNAS and ZFS planners usually care about parity width, scrub cadence, and healthy operating headroom. Capacity is only one part of pool durability.

• Treat RAID-Z2 as a common baseline for medium and large homelab pools.
• Keep meaningful free space to reduce fragmentation pressure under snapshots.
• Plan vdev growth strategy early, since expansion paths affect long-term efficiency.

Brand / Region Glossary

vdev

A virtual device group in ZFS; multiple vdevs form a storage pool.

Scrub

Background integrity scan that verifies checksums and repairs parity mismatches.

RAID-Z Expansion

ZFS feature set and planning topic for growing parity groups safely.

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: QNAP 6x 16TB RAID-Z2 NAS Calculator Next: Unraid 6x 16TB RAID-Z2 NAS Calculator →

FAQ

Can this calculator replace real-world benchmark and rebuild testing?

No. Use this page for pre-purchase sizing, then validate with workload benchmarks, SMART health policy, and a tested restore plan.

Should I optimize this 6-drive plan for available space or resiliency first?

For long-lived NAS pools, resiliency first is usually safer. Capacity can be expanded later, while a risky parity choice can force migration sooner.

How many disk failures can RAID-Z2 tolerate in this setup?

This setup can tolerate 2 drives. Real-world survivability depends on mirror placement, rebuild stress, and drive health.

How much usable storage does 6x 16TB RAID-Z2 provide?

For TrueNAS users, this NAS planning scenario estimates 57.60 TB usable after a 10% reserve from 96.00 TB raw.