Unraid 10x 20TB RAID-Z1 NAS Calculator

Estimate usable TB, parity, and fault tolerance for Unraid NAS users using 10x 20TB in RAID-Z1.

Capacity Snapshot

Raw Capacity

200.00 TB

Usable Capacity

162.00 TB

Fault Tolerance

1 drive

Efficiency

90.0%

ZFS single-parity equivalent of RAID 5; common for smaller homelab pools. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode	Usable	Tolerance	Efficiency
RAID 5	162.00 TB	1 drive	90.0%
RAID 6	144.00 TB	2 drives	80.0%
RAID 10	90.00 TB	1 drive per mirror pair*	50.0%
RAID-Z1	162.00 TB	1 drive	90.0%
RAID-Z2	144.00 TB	2 drives	80.0%

Unraid Planning Notes

Unraid users often optimize for incremental growth and flexible disk replacement, where parity planning and usable capacity targets evolve over time rather than all at once.

• Capacity plans should include phased drive upgrades, not only day-one layout.
• Use parity-protected growth steps to avoid risky bulk migrations.
• Track cache and parity pressure separately from archive data growth.

Brand / Region Glossary

Parity Disk

Dedicated parity disk(s) protecting data disks in the Unraid array model.

Cache Pool

Fast SSD/NVMe pool used for writes and application workloads.

Mover

Scheduled process that migrates data between cache and array tiers.

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: TrueNAS 10x 20TB RAID-Z1 NAS Calculator Next: US 10x 20TB RAID-Z1 NAS Calculator →

FAQ

Should I optimize this 10-drive plan for capacity or resiliency first?

For long-lived NAS pools, resiliency first is usually safer. Capacity can be expanded later, while a risky parity choice can force migration sooner.

How much usable storage does 10x 20TB RAID-Z1 provide?

For Unraid users, this NAS planning scenario estimates 162.00 TB usable after a 10% reserve from 200.00 TB raw.

Why include a 10% reserve when planning NAS available space?

Keeping free space improves filesystem behavior for snapshots, metadata, and write performance. Full arrays often perform worse and rebuild more slowly.

How many disk failures can RAID-Z1 tolerate in this setup?

This setup can tolerate 1 drive. Real-world survivability depends on mirror placement, rebuild stress, and drive health.