← NAS & RAID Calculator

NAS pSEO Landing

10x 10TB RAID 5 NAS Calculator | Usable TB

Estimate usable TB, parity overhead, and fault tolerance for 10x 10TB in RAID 5. Includes reserve planning for NAS and homelab arrays.

Capacity Snapshot

Raw Capacity

100.00 TB

Usable Capacity

81.00 TB

Fault Tolerance

1 drive

Efficiency

90.0%

Balanced capacity and redundancy, but rebuild stress can be high on large disks. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode Usable Tolerance Efficiency
RAID 5 81.00 TB 1 drive 90.0%
RAID 6 72.00 TB 2 drives 80.0%
RAID 10 45.00 TB 1 drive per mirror pair* 50.0%
RAID-Z1 81.00 TB 1 drive 90.0%
RAID-Z2 72.00 TB 2 drives 80.0%

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: 10x 10TB RAID 1 NAS Calculator | Usable TB Next: 10x 10TB RAID 6 NAS Calculator | Usable TB →

FAQ

How much real-world usable storage does 10x 10TB RAID 5 provide?

This NAS planning scenario estimates 81.00 TB usable after a 10% reserve from 100.00 TB raw.

How many disk failures can RAID 5 tolerate in this setup?

This setup can tolerate 1 drive. Real-world survivability depends on mirror placement, rebuild stress, and drive health.

Should I optimize this 10-drive plan for storage headroom or resiliency first?

For long-lived NAS pools, resiliency first is usually safer. Capacity can be expanded later, while a risky parity choice can force migration sooner.

Can this calculator replace real-world benchmark and rebuild testing?

No. Use this page for pre-purchase sizing, then validate with workload benchmarks, SMART health policy, and a tested restore plan.