NAS pSEO Landing

4x 14TB RAID 1 NAS Calculator | Usable TB

Estimate usable TB, parity overhead, and fault tolerance for 4x 14TB in RAID 1. Includes reserve planning for NAS and homelab arrays.

Capacity Snapshot

Raw Capacity

56.00 TB

Usable Capacity

12.60 TB

Fault Tolerance

3 drives*

Efficiency

25.0%

Strong redundancy but low capacity efficiency. Great for small, critical datasets. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode	Usable	Tolerance	Efficiency
RAID 5	37.80 TB	1 drive	75.0%
RAID 6	25.20 TB	2 drives	50.0%
RAID 10	25.20 TB	1 drive per mirror pair*	50.0%
RAID-Z1	37.80 TB	1 drive	75.0%
RAID-Z2	25.20 TB	2 drives	50.0%

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: 4x 12TB RAID-Z2 NAS Calculator | Usable TB Next: 4x 14TB RAID 5 NAS Calculator | Usable TB →

FAQ

How many disk failures can RAID 1 tolerate in this setup?

This setup can tolerate 3 drives*. Real-world survivability depends on mirror placement, rebuild stress, and drive health.

How much usable storage does 4x 14TB RAID 1 provide?

This NAS planning scenario estimates 12.60 TB usable after a 10% reserve from 56.00 TB raw.

Can this calculator replace real-world benchmark and rebuild testing?

No. Use this page for pre-purchase sizing, then validate with workload benchmarks, SMART health policy, and a tested restore plan.

Why include a 10% reserve when planning NAS capacity?

Keeping free space improves filesystem behavior for snapshots, metadata, and write performance. Full arrays often perform worse and rebuild more slowly.