NAS pSEO Landing

4x 8TB RAID-Z1 NAS Calculator | Usable TB

Estimate usable TB, parity overhead, and fault tolerance for 4x 8TB in RAID-Z1. Includes reserve planning for NAS and homelab arrays.

Capacity Snapshot

Raw Capacity

32.00 TB

Usable Capacity

21.60 TB

Fault Tolerance

1 drive

Efficiency

75.0%

ZFS single-parity equivalent of RAID 5; common for smaller homelab pools. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode	Usable	Tolerance	Efficiency
RAID 5	21.60 TB	1 drive	75.0%
RAID 6	14.40 TB	2 drives	50.0%
RAID 10	14.40 TB	1 drive per mirror pair*	50.0%
RAID-Z1	21.60 TB	1 drive	75.0%
RAID-Z2	14.40 TB	2 drives	50.0%

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: 4x 8TB RAID 10 NAS Calculator | Usable TB Next: 4x 8TB RAID-Z2 NAS Calculator | Usable TB →

FAQ

How many disk failures can RAID-Z1 tolerate in this setup?

This setup can tolerate 1 drive. Real-world survivability depends on mirror placement, rebuild stress, and drive health.

How much usable storage does 4x 8TB RAID-Z1 provide?

This NAS planning scenario estimates 21.60 TB usable after a 10% reserve from 32.00 TB raw.

Why include a 10% reserve when planning NAS available space?

Keeping free space improves filesystem behavior for snapshots, metadata, and write performance. Full arrays often perform worse and rebuild more slowly.

Can this calculator replace real-world benchmark and rebuild testing?

No. Use this page for pre-purchase sizing, then validate with workload benchmarks, SMART health policy, and a tested restore plan.