← NAS & RAID Calculator

NAS pSEO Landing

5x 16TB RAID-Z1 NAS Calculator | Usable TB

Estimate usable TB, parity overhead, and fault tolerance for 5x 16TB in RAID-Z1. Includes reserve planning for NAS and homelab arrays.

Capacity Snapshot

Raw Capacity

80.00 TB

Usable Capacity

57.60 TB

Fault Tolerance

1 drive

Efficiency

80.0%

ZFS single-parity equivalent of RAID 5; common for smaller homelab pools. This scenario applies a 10% filesystem reserve.

Run Interactive Calculator →

Alternative Mode Comparison

Mode Usable Tolerance Efficiency
RAID 5 57.60 TB 1 drive 80.0%
RAID 6 43.20 TB 2 drives 60.0%
RAID 10 N/A N/A N/A
RAID-Z1 57.60 TB 1 drive 80.0%
RAID-Z2 43.20 TB 2 drives 60.0%

NAS Cluster Guides

NAS Hub RAID Level Compare RAID Capacity Matrix Planning Quick Sheet RAID Selector NAS FAQ

Related Long-Tail Calculators

2x 4TB RAID 1 2x 6TB RAID 1 2x 8TB RAID 1 2x 10TB RAID 1 2x 12TB RAID 1 2x 14TB RAID 1 2x 16TB RAID 1 2x 18TB RAID 1 2x 20TB RAID 1 3x 4TB RAID 1 3x 4TB RAID 5 3x 4TB RAID-Z1 3x 6TB RAID 1 3x 6TB RAID 5 3x 6TB RAID-Z1 3x 8TB RAID 1

Sequential Long-Tail Navigation

← Previous: 5x 16TB RAID 6 NAS Calculator | Usable TB Next: 5x 16TB RAID-Z2 NAS Calculator | Usable TB →

FAQ

How much real-world usable storage does 5x 16TB RAID-Z1 provide?

This NAS planning scenario estimates 57.60 TB usable after a 10% reserve from 80.00 TB raw.

Should I optimize this 5-drive plan for capacity or resiliency first?

For long-lived NAS pools, resiliency first is usually safer. Capacity can be expanded later, while a risky parity choice can force migration sooner.

Can this calculator replace real-world benchmark and rebuild testing?

No. Use this page for pre-purchase sizing, then validate with workload benchmarks, SMART health policy, and a tested restore plan.

How many disk failures can RAID-Z1 tolerate in this setup?

This setup can tolerate 1 drive. Real-world survivability depends on mirror placement, rebuild stress, and drive health.